Gold Member Since 2015 
Audited Supplier
| Reference FOB Price: | US $899.00-1,270.00 / Piece |
|---|---|
| Min. Order: | 1 Piece |
| Type: | Fiber Amplifier |
|---|---|
| Wiring Devices: | ODF |
| Certification: | CE, ISO, RoHS |
the optical transmission system equipment realized combines the function of the amplification of optical signal OLT
and CATV 1550nm. The optical input number: 1 port of CATV + 16 ports PON input ports, 16 ports outputs
of 1550nm/1490nm/1310nm combined output, the combined optical output power rate: 27~36dBm. plug-in
power supply achieved the function of OLT and CATV 1550nm optical single combined and amplify,
having high cost-performance value.
FWAP-1550H-16xNdBm series EDFA combiner is a representative one in the optical amplifier. As the
EDFA's wavelength is 1550nm, which is in line with the low-loss band of fiber and its technology has been
relatively mature, so widely used. Erbium-doped fiber is the core component of the EDFA, it makes
quartz optical fiber as matrix material and incorporates a certain proportion of rare earth element erbium
ions (Er3 +) in the core of a fiber. When a certain amount of pump light is injected into the erbium-doped
fiber, Er3 + has been excited from the low-energy level to the high energy level, due to Er3 + has a very
short lifespan on the high energy level, and soon transit to a higher level by the form of a non-radiative,
and forms the population inversion distribution between this energy level and low-energy-level. Because
the energy between these two energy levels is exactly equal to the photon energy of 1550nm, stimulated
emission of 1550nm light can only occur, we can only enlarge the 1550nm optical signal.
FWAP-1550H-16xNdBm series EDFA combiner adopts 980nm or 1480nm high linearity, optical isolation,
the DFB, thermoelectric cooling DFB laser produced by JDSU, Fujitsu, Nortel, Lucent, Fitel, and other
world-renowned semiconductor companies as the pumping source. The interior of the machine is
equipped with the light power export stable circuit and laser Thermoelectric cooling device Temperature
stability control circuit to ensure optimal machine performance and long-life laser stability. The
microprocessor software monitors the lasers' working state, and the Digital Panel (VFD) displays the operating
parameters. Once the laser operating parameters deviate from the permissible range set by the software,
micro-processing will automatically turn off laser power, the red light goes on to warn, digital panel prompts
the cause of troubles., For a detailed report of the device parameters please read "instructions."
Features
-16 uplink optical ports used in OLT, 16 ports of PON, and 1550nm CATV EDFA Combiner out, Each
output port for the optical amplifier has built-in well-performed CWDM, and 1550nm CATV's output optical
port multiplexes 1310/1490n's data stream and not lose.
-Double cooling system to protect the pump laser.
-RJ45 Port for the Plug-in SNMP system can realize remote management at any time.
-Adopting JDSU, Bookham, and Fitel laser.
- LCD displays the parameters, functions, and trouble alarm.
-Switch power supply can work in the range of 90V~265V AC or -48V DC.
- FWAP-1550T series,1U,4/8ports of PON+1 port CATV input EDFA,4/8ports of coupled out,EDFA:13~26dBm
-FWAP-1550H series,2U,8/16/32ports of PON+1 port CATV input EDFA,8/16/32 ports of coupled out
, EDFA:27~39dBm
Set and operation
Items | Parameter | Supplement | |
CATV Operation wavelength | nm | 1530~1565 | CATV |
OLT pass wavelength | nm | 1310/1490 |
|
CATV pass wavelength loss | dB | 0.8 | 1550nm |
OLT pass wavelength loss | dB | 0.8 | 1310/1490nm |
CATV & OLT isolation | dB | 40 |
|
Number of uplink optical ports (for OLT) | pcs | 4 | FWAP-1550T,1U |
8/16/32 | FWAP-1550H,2U | ||
CATV input power | dBm | -5~+10 |
|
Total output power | dBm | 13~26 | FWAP-1550T,1U |
27~39 | FWAP-1550H,2U | ||
Number of output ports | pcs | 4 | FWAP-1550T,1U |
8/16/32 | FWAP-1550H,2U | ||
Each port output power | dBm | 6~22 |
|
Difference of each output power | dB | -0.5~+0.5 |
|
Output power adjustable range | dBm | -3~0 |
|
Noise figure (Pin=0dBm) | dB | 4.5~5.0 |
|
Polarization dependence loss | dB | 0.3 |
|
Polarization dependence gain | dB | 0.4 |
|
Polarization mode dispersion | ps/nm | 0.3 |
|
Input/output isolation | dB | 30 |
|
Pump power leakage | dBm | -30 |
|
Echo loss | dB | 55 |
|
SNMP network management interface |
| RJ45 |
|
Optical connector(IN/OUT) |
| SC/PC , SC/APC | LC/APC |
Power supply | V | 90~265 | 220VAC |
30~72 | -48VDC | ||
Power consume | W | 50~150 |
|
Work temp. | ºC | 0~65 |
|
Storage temp. | ºC | -40~80 |
|
Relative humidity | % | 5~95 |
|
Size (W) × (D) × (H) | " | 19×15×1.75 | FWAP-1550T,1U |
" | 20×19×3.5 | FWAP-1550H,2U | |
Products series
| Total Output (dBm) | Total Output (mW) | Output No. | Each Outputs(dBm) |
| FWAP-1550H-27 | 500 | 4 | 19.5 |
| 8 | 16.0 | ||
| FWAP-1550H-28 | 630 | 4 | 20.5 |
| 8 | 17.0 | ||
| FWAP-1550H-29 | 800 | 4 | 21.5 |
| 8 | 18.0 | ||
| FWAP-1550H-30 | 1000 | 8 | 19.0 |
| 16 | 15.5 | ||
| FWAP-1550H-31 | 1250 | 8 | 20.0 |
| 16 | 16.5 | ||
| FWAP-1550H-32 | 1600 | 8 | 21.0 |
| 16 | 17.5 | ||
| FWAP-1550H-33 | 2000 | 8 | 22.0 |
| 16 | 18.5 | ||
| FWAP-1550H-34 | 2500 | 16 | 19.5 |
| 32 | 16.0 | ||
| FWAP-1550H-35 | 3200 | 16 | 20.5 |
| 32 | 17.0 | ||
| FWAP-1550H-36 | 4000 | 16 | 21.5 |
| 32 | 18.0 | ||
| FWAP-1550H-37 | 5000 | 16 | 22.5 |
| 32 | 19.0 | ||
| FWAP-1550H-38 | 6000 | 16 | 23.5 |
| 32 | 20.0 | ||
| FWAP-1550H-39 | 8000 | 16 | 24.5 |
| 32 | 21.0 |
---------------------------------------------FAQ-----------------------------------------------------------
1. What are your terms of payment?
Usually, we can accept T/T, PayPal, and Western Union. You can select the terms of payment which is more convenient for you.
2. What about the lead time?
Usually, if there is a stock of goods, we will deliver the goods within 3~5 workdays after we receive the payment.
3. How about the shipping?
Usually, we will deliver the goods via International Express like FedEx, DHL, TNT, and UPS, and so on. The door-to-door delivery service will be provided.
4. How can I place an order?
(1) The agreement is achieved on the product price and product specifications.
(2) We make a proforma invoice for your confirmation.
(3) When you agree on the proforma invoice, you make the payment.
(4) We deliver the goods after we receive your payment.
5. Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.
6. What are the advantages of your products?
A. Good quality and competitive prices.
B. Strict quality control during the production process.
C. Professional operations in processes of production, sales, assembling, packaging, and shipping.
D. Good after-sale service. Professional online technical support can be provided. Moreover, if there is any problem with the goods, we will help to solve the problem or provide a replacement for the goods.