40 Ports Xg-Pon Wdm EDFA for 10g Pon Olt

• Customization: Available
• Type: Fiber Amplifier
• Wiring Devices: ODF
• Model NO.: FWA22P-XGS-40XN
• Condition: New
• Operating Wavelength (Nm): 1540~1565 Nm
• Input Optical Power(dBm): -10~+10 dBm
• Nominal Input Optical Power (dBm): 3 dBm
• Noise Figure (dB) (+3 dBm,@1550nm): 5.0~6.0 dB
• Optical Connector(out): Sc/APC, Sc/Upc
• Pump Work Quantity (N): 1~5
• Power Supplies (VAC): 110/220VAC or 48VDC
• Wdm-Pon with Optical Path: 40 Ports
• Size (mm): 482.6*387*135
• Transport Package: Case Packing
• Specification: CE, ISO, RoHs
• Trademark: FULLWELL (OEM, ODM available)
• Origin: Zhejiang, China
• HS Code: 8517622990
• Production Capacity: 200PCS/Month
• Package Size: 62.00cm * 45.00cm * 27.00cm
• Package Gross Weight: 12.000kg

Product Description

Product Description

FWAP-1550H-40xN Series, 40 ports PON&CATV WDM EDFA

FWAP-1550H series EYDFA optical amplifier combiner is the latest equipment of the optical transmitting system for PON+CATV FTTH/FTTP. It realizes the combination function of OLT PON and CATV 1550nm after the optical signal is amplified. In detail, there is one way CATV input plus 40 ports PON signal in and the 40 ports which have 1490+1310+1550nm combined output 1550nm with 30 to 45dBm total power. This equipment is well compatible with the OLT/ONU of HUAWEI, ZTE, FiberHome, etc, and no data lost which owns high-cost performance.

Ordinary erbium-doped fiber amplifier (EDFA) has the advantages of low noise, high gain, wider bandwidth, highly efficient pumping, and stable operating, which is widely used in CATV systems. However, along with the implementation of fiber to the house (FTTH), system C/N will be worse significantly when EDFA uses as cascade amplification. Therefore, EDFA is required to produce high saturation output power and low distortion as shown as 13dBm to 23dBm (approximate. 27dBm is limited) for EDFA saturated output power. Moreover, the gain fiber of EDFA is single-mode and single-packed fiber. The optic of the pump is directly coupled to the fiber but the diameter of the fiber is very small therefore it requires a single mode of pump optic. The semiconductor of single-mode only supports hundreds of milliwatts of output power and it is limited by the area of the pump which makes high-power pump optic cannot be coupled. It consequently causes serious output power of the optical laser. In case, it develops double-cladding fiber internationally and solves the problem of the listed weakness of single-packed fiber which improves 1 to 2 levels for output power. It then drives the development of a high-power optical amplifier. After several years of research, our company overcomes multiple technical difficulties, high-power ytterbium-erbium co-doped double-cladding fiber amplifier was developed for the CATV system to fit the requirement of FTTH and FTTB after conquering many technical difficulties.

This serious product adopts JDSU, LUMENTUM, etc multimode high power pump laser as the pump source and American OFS closed beam splitter as the double-cladding synthesizer. Built-in stable optical power circuit and laser thermoelectricity freezer guarantee the best performance and long life cycle operating. Microprocessor software monitors the operating status of the laser which shows on LCD. Once the operating parameter of the laser deviates from the range of set value, the microprocessor will cut the power supply of the laser automatically and the red light turn will turn on with an alarm (prompting a fault caused on LCD).

 

Our Advantages

High Quality: Adoption of multimode high power pump laser and power is optimized by software which maximizes lower NF of EDFA rival to normal EDFA. It makes the system get superior CNR through power-optimized balancing techniques.

Reliability: adoption of 19″3U standard case, built-in high-performance external modular switching power supply, operating under AC90 to 255V, optional DC48V power supply (pre-order) hot-plugging supported, automatic temperature control case heat dissipation with dual power cold&hot backup.
Intuitive: The microprocessor monitors the operating status of the pump laser which is the most valuable part of the equipment, operating parameters show on the LCD display.
Network Management: Optional type status monitoring transponder certainly satisfy national, SCTE, HMS, WEB standard, it realizes network management monitoring function.
Adjustable Output Power: The equipment is advanced designed which satisfies a bigger range of adjustments from lower to -2dBm (special offer).
High Power Output: Combined output power has a maximum of 30~45dBm and multiple-output configuration is available for users' requirements.
WDM Insertion: It is available to integrate the FWDM module if the user needs which is convenient when combining GPON, and EPON.
Connecting Safety Mode: To prevent the optical patch cord end face from being burnt when the optical output is connected, enable this mode to reduce the output power direct to 19dBm during connection. Once turn off this mode, it returns to the original set power.
Built-in optical path selector(customized): CATV optical signal has two way as A and B optical switch input,(OPT SWITCH): auto(prefer)or manual(force) mode, auto mode uses path A in rule and switches to B as A is not satisfied followed path priority.

Product Parameters

Technical Parameters

Items		Unit	Performance Index
Optical Operating Wavelength		nm	1535~1565
Input Optical Power Range		dBm	-3~+10
Nominal Input Optical Power		dBm	+3
Maximum Alarm Value		dBm	≥+10 front panel display alarm, buzzer ring
Minimum Alarm Value		dBm	<<>-10 front panel display and power off
Noise Ratio		dB	≤5.0 (0dBm,@1550nM)
Gain Flatness		dB	<<><<>±0.3
Optical Power Output Stability		dB	<<><<><<>±0.5
Polarization Sensitivity		dB	<<><<><<><<>0.2
Polarization Mode Dispersion		Ps	<<><<><<><<><<>0.5
Input End Pump Leakage Power		dB	≤-30
Output End Pump Leakage Power		dB	≤-30
Optical Input, Output Return Loss		dB	>45 (APC Stepped Face)
Pump Operating Number		No.	2~5
Rated Output Power		dBm	30~45
Linker(IN)		-	SC/APC
Linker(OUT)		-	SC/APC
C/N		dB	≥48(comment 1)
C/CTB		dB	≥63(comment 1)
C/CSO		dB	≥63(comment 1)
Power Supply/Consumption		V/W	AC165~265 or DC-48/20(hot-plugging single power)
Operating/Storage Temperature		ºC	-20~50/-30~70
Operating/Storage Humidity		%	5~90
Case Size		mm	482.6×387×135
Network Management Connector		/	RJ45(following national network management standard, supports WEB)
PON Optical Path with WDM	PON Wavelength	mm	1310/1490
	PON Linker	/	SC/UPC
	PON Insertion Loss	dB	<<><<><<><<><<><<>1.2
	1550 Port Insertion Loss	dB	<<><<><<><<><<><<><<>0.7
Comment: 1. Optical Link Test provides link index by measuring optical transmitter FWT-1550EH-2X7 and receiver FWR-8610RW. 2. The main performance index above accords with GY/T 184-2002 CATV analog optical amplifier technical requirement and measuring method.

Product Model Series

 

Type	Total output power	Output No.	Each Output(dBm)
	dBm(mW)
FWAP-1550H-40x15	33dBm(2000mW)	40	15
FWAP-1550H-80x11		80	11
FWAP-1550H-40x16	34dBm(2500mW)	40	16
FWAP-1550H-80x12		80	12
FWAP-1550H-40x17	35dBm(3000mW)	40	17
FWAP-1550H-80x13		80	13
FWAP-1550H-40x18	36dBm(4000mW)	40	18
FWAP-1550H-80x14		80	14
FWAP-1550H-40x19	37dBm(5000mW)	40	19
FWAP-1550H-80x15		80	15
FWAP-1550H-40x20	38dBm(6000mW)	40	20
FWAP-1550H-80x16		80	16
FWAP-1550H-40x21	39dBm(8000mW)	40	21
FWAP-1550H-80x17		80	17
FWAP-1550H-40x22	40dBm(10000mW)	40	22
FWAP-1550H-80x18		80	18

 

Detailed Photos

 

 

 

 

 

 

  

 

 

FAQ

1. What are your terms of payment?

Usually, we can accept T/T, PayPal, and Western Union. You can select the terms of payment that are more convenient for you.

2. What about the lead time?

Usually, if there is a stock of goods, we will deliver the goods within 3~5 workdays after we receive the payment.

3. How about the shipping?

Usually, we will deliver the goods via International Express like FedEx, DHL, TNT, and UPS, and so on. A door-to-door delivery service will be provided.

4. How can I place an order?

(1) The agreement is achieved on the product price and product specifications.

(2) We make a proforma invoice for your confirmation.

(3) When you agree on the proforma invoice, you make the payment.

(4) We deliver the goods after we receive your payment.

5. Can you do OEM for us?

Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.

6. What are the advantages of your products?

A. Good quality and competitive prices.

B. Strict quality control during the production process.

C. Professional operations in processes of production, sales, assembling, packaging, and shipping.

D. Good after-sale service. Professional online technical support can be provided. Moreover, if there is any problem with the goods, we will help to solve the problem or provide replacement of the goods.