Xgs 10g Pon Filter TV Optical Receiver Mini Node

• Customization: Available
• Type: FTTH Optical Receiver / Optical Node
• Certification: CE, ISO, RoHS
• Model NO.: FWR-XGS-1000GSD
• Item Name: Fullwell FTTH Wdm Optical Receiver
• Input Wavelength: 1550/1490/1310/1270/1577nm
• Range of Receive Optical Power: -2 ~ -18dBm
• Bandwidth /Inequality: 47 ~ 1000
• AGC Feature: -12~-2dBm/82dBuV
• Adj. Range of Output Level: 0~15
• Fiber Link: Sc/APC
• OEM Service: Laser Logo & Use Your Company Model
• Transport Package: 90*60*22mm by Strong Carton Based on 1PCS
• Specification: CE, ROHS
• Trademark: Fullwell (can OEM)
• Origin: Zhejiang Hangzhou
• HS Code: 8517622990
• Production Capacity: 50000 PCS/Month
• Package Size: 18.00cm * 12.00cm * 2.00cm
• Package Gross Weight: 0.200kg

Product Description

FWR-XGS-1000GSD, Optical Receiver With Filter

Product Description

 1. Product Description

In order to refine the triple-play integrated equipment and reduce operator investment costs, in the single-fiber three-wave home solution, some users, such as elderly users, do not use broadband signals and only use CATV signals. In response to the requirements of this solution, Fullwell has produced an industry-leading triple-play optical receiver with filter series products.

FWR-XGS-1000GSD uses high isolation and filtering technology to separate CATV from triply play waves. It only receives a 1550nm CATV signal. It uses high-bandwidth, high-sensitivity photocells, low-noise matching circuits, GaAs amplification, low optical power receiving, and RF-AGC technology. Receiving power range from -18 to + 2dBm, Light control AGC: -12~-2dBm, RF rated output 82dBuv.

The FWR-XGS-1000GSD is also equipped with an optical power-receiving monitoring LED indicator (≥-15dBm) on the panel. FWR-XGS-1000GSD filter-type optical receiver, using a high-quality power adapter designed for 5 years of non-stop work, is an ideal optical receiver with a filter for FTTH single fiber to the home network.

Our Advantages

 

2. Product Feature

• PIN optical receiving power, -1dBm receiving sensitivity, AGC accepting range: -2 ~ -12dBm, output stable level: 82dBuv.
• Wide bandwidth type: 47 ~ 1000MHz working bandwidth.
• One fiber can receive long-range CATV RF signal and filter out PON signal that has an effect on the CATV signal.
• It can be used with the FULLWELL optical transmitter and WDM EDFA for FTTH triple-play transmission and coverage.

• Industry-leading 5V power adapter, non-stop work design for more than 5 years.
• It can be compatible with any FTTx PON triple-play optical network.
• Black plastic enclosure, exquisite texture appearance, to demonstrate brand strength.

Product Parameters

 

Item		Unit	FWR-XGS-1000GSD
Optical  characteristic	input wavelength	nm	1310/1490,1270/1577,1550
	operation wavelength	nm	1540~1560
	responsivity	(A/W)	≥0.9
	receive power range	dB	+2~-18
	reflection loss	dB	≥50
	fiber linker	/	SC/APC
RF characteristic	bandwidth/flatness	MHz/dB	45~1000
	output level	dBuv	82±1.5(AGC: -2~-12dBm)
	reflection loss	dB	≥14(characteristic impedance75Ω)
	RF output impedance	Ω	75(RF Output Interface Metric F)
	MER (Closed Equalization)	dB	≥25(64QAM) ≥31(256QAM)
	MER (Open Equalization)	dB	≥32(64QAM)  ≥34(256QAM)
	Bit Error Rate(BER)	/	≤1×10^-4
	CNR/CTB/CSO	dB	≥43/≥54/≥54(-9dBm/Nominal Level)
Others	Power Supply/Consumption	V/W	External AC90~255V→DC5/≤2
	Working/Storage Temperature	ºC	-25~55 / -40~75
	Working/Storage Humidity	%	5~90(No Condensation)
	size	mm	90×60×22

Detailed Photos

 

 

 

Installation Instructions

1 Power Input: FWR-XGS-1000GSD is the external power supply input port, First should be the DC+5V external voltage stabilizer output line connected to the machine POWER IN, then put DC+5V external mano-stat insert 100/240 V, DC5V Face posted power light, show Power part is regular.

2 Optical Input:1540-1650nm CATV optical signal reception, clean the end face with an alcohol cotton ball before connection, when the optical signal is input, and the optical receiving power range is at +2~-15dBm, the Laser indicator in the surface turns from red to green, shows that the photoelectric part is working normally; when the optical receiving power is >+2dBm, the Laser indicator turns yellow, shows the input optical power too high alarm, when the optical power <-15dBm, the Laser indicator turns red, shows the under-optical power alarm. The PON port is connected to the ONU. When connecting, pay attention to cleaning the end of the patch cord, the insertion loss should be ≤1dB.
3 RF Output Level Adjustment : CATV: it's the RF output port, optical control AGC. When the optical input signal is input at -12~-2dBm, RF constant output at 82dBuv output(1.5dB). When the optical input signal is less than -15dBm, the RF output level also decreases. The relationship is that the optical signal drops by 1dB, and the RF output drops by 2dB; however, the output level increases due to the excessive modulation of the pre-stage optical transmitter, otherwise, it is smaller, the output level error is±2~3dB. The output level of the unit is the analog level, the digital level field strength meter measures 8dB, and the spectrum analyzer measures 10dB; when optical receiving power is > -2dBm, the RF output level will also increase. The relationship is that the optical signal rises by 1dB and the RF output level rises by 2 dB. This level will increase and meantime the MER index will decrease. It is recommended that the optical receiving power should be designed within the optical control AGC range to prevent the optical receiving power from being too high to reduce the CTB/CSO index, and the optical receiving power is too small to reduce the CNR/MER index and affect normal reception of CATV signals.

4. Install & Test Attentions
4.1 This device is an indoor structure and should not be used in places that are easily invaded by rainwater; it should have proper space in the indoor box for heat dissipation; the shielding net of the output cable must be grounded, and the grounding resistance should be less than 4Ω.
4.2 Patch cord input and cable output must be reserved for a certain length to avoid accidents. Please do not remove the seal If the optical interface is not used. It's equipped with: IN SC/APC. During connection, better to apply the same adapters, do not apply different types.
4.3 RF output is directly connected to the user branch or distributor. The branch and distributor output null terminals must be connected with a 75Ω dummy load. Otherwise, the set-top box will cause mosaic due to the input impedance mismatch.

5. Accessory
5.1 Outlay Power Supply AC100~240V / DC5V 500mA  1PC

5.2 Certificate: (attached in this manual)

Company Profile

FAQ

1. What are your terms of payment? 
Usually, we can accept T/T, PayPal, and Western Union. You can select the terms of payment which is more convenient for you. 

2. What about the lead time? 
Usually, if there is a stock of goods, we will deliver the goods within 3~5 workdays after we receive the payment. 

3. How about the shipping? 
Usually, we will deliver the goods via International Express like FedEx, DHL, TNT, UPS, and so on. The door-to-door delivery service will be provided. 

4. How can I place an order? 
(1) An agreement is achieved on the product price and product specifications. 
(2) We make a proforma invoice for your confirmation. 
(3) When you agree on the proforma invoice, you make the payment. 
(4) We deliver the goods after we receive your payment. 

5. Can you do OEM for us? 
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you. 

6. What are the advantages of your products? 

1. Good quality and competitive prices. 
2. Strict quality control during the production process.
3. Professional operations in processes of production, sales, assembling, packaging, and shipping.
4. Good after-sale service. Professional online technical support can be provided. Moreover, if there is any problem with the goods, we will help to solve the problem or provide replacement of the goods.