| Customization: | Available |
|---|---|
| Type: | Optical Receiver |
| Certification: | CE, ISO, RoHS |
|
Still deciding? Get samples of US$ 15/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Fiber to the home ( FTTH ) broadband access is the ultimate development goal, FWR-XGS-8610W optical receiver is the target terminal product for this goal. FWR-XGS-8610W device adopts the technology of high isolation WDM in order to separate CATV and XGS-PON ONT signal. This device can be used together with Fullwell XGS-PON ONT FWXG-890SG. Furthermore, it also adopts low optical power receiving and RF-AGC control techniques, which could achieve the requirement of ≤-2dBm CATV receiving for FTTH. The optical power receiving monitoring indicator LED ( ≥-15dBm) is provided on the panel and it supports RF outputs constantly, the convenience for customer's use, which is the ideal receiver equipment for FTTH.
Product Feature
♦ FWR-XGS-8610W is the input interface of the optical signal, in optical access clean APC TOP with alcohol, then align the adapter sunken mouth, and fiber mouth march link.
♦ When optical signal accesses (≥-18dBm) then lights on in the panel, which shows the optical part is regularly working; Lights will be changed by receiving power as yellow(>+2dBm), green(+2~-18dBm) and red (<-18dBm).
♦ ONU is 1270/15771310/1490/1550nm connection interface, please do not take off the cover before you use.
| Item | Unit | Performance Parameter | ||
| Optical characteristic | Input Wavelength | nm | 1310/1490,1550,1270/1577 | |
| Output Wavelength | nm | 1310/1490,1270/1577 | ||
| Operating Wavelength | nm | 1540~1560 | ||
| Channel Separation | dB | ≥40(1310/1490nm+1550nm ) | ||
| Response | A/W | ≥0.9 | ||
| Receive Power Range | dBm | -2~-18 | ||
| Reflection Loss | dB | ≥55 | ||
| Fiber Connector | / | SC/APC | ||
| XGS-PON Connector | / | SC/APC | ||
| RF characteristic | Bandwidth/ Flatness |
MHz/dB | 47-1000/≤±1 | |
| Output Level | dBuV | AGC: 82±1/(-2~-12dBm) | ||
| Reflection Loss | dB | ≥14 | ||
| RF Output Interface | / | Inch (one-way output) | ||
| CNR | dB | ≥44 | (-9dBm receiving,PAL-D 60CH,OMI3.8%) | |
| CTB/CSO | dB | ≥55/≥55 | ||
| MER(Closed Equalization) | dB | ≥25(64QAM) ≥31(256QAM) |
-12dBm Reception, Optical Link 94 Digital Channels | |
| MER(Open Equalization) | dB | ≥32(64QAM) ≥34(256QAM) |
||
| Bit Error Rate(BER) | / | ≤1×10-4 | Measure at Least 100Bits | |
| Other requirements | Power Supply/ Consumption |
V/W | External AC100~240V→DC5/5 | |
| Working/Storage Temperature | ºC | -35~50/-40~75(humidity 5~90%) | ||
| Dimension | mm | 80×55×25 | ||
1 Power Input
POWER IN: FWR-XGS-8610W is the external power supply input port, First should be the DC+5 V external voltage stabilizer output line connected to the device POWER IN, then put DC+5V external mano-stat insert 100/240V, DC5V face posted power light, show power part is regularly working.
2 Optical Fiber Input
OPTICAL IN: FWR-XGS-8610W is the input interface of the optical signal, in optical access should clean APC TOP with alcohol, then align the adapter sunken mouth, and fiber mouth march link. When the light receiving power is larger than +2dBm, the yellow indicator lights on to show the optical signal is too high. When the light receiving power is less than -15dBm, the red indicator lights on to show the optical signal is too small. If the light receiving power is in the range of +2 ~ -15dBm, the green indicator lights on to show the optical signal are receiving normally.
PON: PON port connect next to ONU, please don't take off the port cover when no use.
Install Test Matter Need Attention
1.FWR-XGS-8610W device is an indoor type structure, not to be used in place of harassment by the rain. Packed in the box of the indoor appropriate space for cooling. The output of the cable shielding network must be grounded, grounding resistance should be less than 4 Ω. The local power supply for the electrical shell has to be grounded above ground resistance.
2. Patch cord fiber input and output cable have to be reserved for a certain use, FWR-XGS-8610W device is with SC/APC, PON link with SC/APC.
1. What are your terms of payment?
Usually, we can accept T/T, PayPal, and Western Union. You can select the terms of payment which is more convenient for you.
2. What about the lead time?
Usually, if there is a stock of goods, we will deliver the goods within 3~5 workdays after we receive the payment.
3. How about the shipping?
Usually, we will deliver the goods via International Express like FedEx, DHL, TNT, UPS, and so on. The door-to-door delivery service will be provided.
4. How can I place an order?
(1) An agreement is achieved on the product price and product specifications.
(2) We make a proforma invoice for your confirmation.
(3) When you agree on the proforma invoice, you make the payment.
(4) We deliver the goods after we receive your payment.
5. Can you do OEM for us?
Yes. If there is a certain order quantity, we can do OEM including printing, logo, and customized model for you.
6. What are the advantages of your products?
){kind=link}